Atlas of Seram Desert

Through access to Siemens technical reports, internal research and development as well as reverse engineering of Siemens samples have been obtained. First, raw materials such as alumina, mullites, spinel, colloidal silica glue, nano solutions and other additives are mixed together in a mixer, and then poured into a mold and vibrated for homogenization, then it is completely compressed with the help of a press. . After closing the mold, it is time for the main and most important part of the production process. The filled molds are transferred to the freezing tunnel. At this stage, on the one hand, the 11% expansion of the carrier material, due to freezing, and on the other hand, the impossibility of material exiting the mold leads to the phenomenon of cold isostatic molding, and the parts removed from the mold during this process will have high mobile raw strength. After this stage, the product will go through the baking process and after baking it is ready to be packed and sent to the customer.

Another advantage of this method is the absence of cement in the composition of raw materials, so properties such as resistance to chemical corrosion and thermal shock resistance and finally the lifespan of the products are increased. Therefore, all the company’s products, such as inner and outer nozzles of Patil, molten channels, Pores Plug, Well Block, Dami and Tandish Setting, Burner Block, Rolling Furnace Floor Bricks, Furnace Ferrules, as well as Tandish Block and Tandish Core, Ferrule The ones used in the protective wall of reaction furnaces, sulfur recycling units and other parts used in steel, copper, cement, refineries, and oil and gas industries are produced by this method.