Atlasseram Desert Co., Ltd. manufactures Tandish glass bottle and supplies this product with the highest quality after receiving confirmation from international laboratories.
There are several holes under the tundish container so that the melt, which has undergone all the necessary operations and is ready for the casting line, is transferred through these holes to the production of ingots or slabs. In the passage of the melt from the Tandish container to the casting line, well blocks or Tandish cups are used. Tandish cores are used inside these well blocks or glasses, and these cores must have very high corrosion resistance and wear resistance.
The set well block and split ring are installed under the tandish container of Saba Steel Complex, cow head nozzles, the melt comes out from the two holes at the bottom of these nozzles and slabs are produced in the casting line. Well block and split ring are used for precise placement and installation of these cow head nozzles under the tandish container.
Ceramic apexes are anti-wear aluminum parts and their appearance is similar to a funnel. These parts must have very high cold compressive strength along with wear resistance. They should also have very accurate dimensions and angles.
The inner and outer nozzles of the bottle are connected to the sliding valve system. A nozzle is installed on the inside of the sliding valve which is inside the bottle, which is called the internal nozzle of the bottle. Also, the outer part of the sliding valve also has a nozzle, which is called the outer nozzle of Patil.
Electric arc furnace or EAF furnace is included in the group of electric furnaces. Today,
According to May Metals, today these materials are widely used as a protective coating for
Mohammad Hosseinzadeh Yazdi, CEO of Atlas Ceram Kavir Company, says: “This product is designed and
